See How a Professional Cleans These Upholstered Dining Room Chairs for a Homeowner in Greensboro

Upholstery and Furniture Steam Cleaning Services in Greensboro, NC

We were recently called out to a home in Greensboro, NC where a homeowner was frustrated with her dining room chairs.

The upholstered seats had collected years of dust, stains, and spots from family dinners, birthday cake, and the occasional spilled drink.

She had tried to spot clean them with a fabric spray and a damp rag, but that only made things worse. Some areas looked blotchy, and the stains just spread.

That’s when she decided to call in a pro.

Save $50 on Upholstery Cleaning Today

At J Rex Cleaning Solutions, we specialize in furniture steam cleaning, and we know how to handle delicate fabrics the right way. For this job, we used our five step upholstery cleaning process that lifts out stains, removes odors, and leaves the fabric clean without over-wetting.

If you’re in Greensboro and your furniture needs a reset, we’re here to help. Keep reading to see how we handled this job and a few tips if you’re trying to care for upholstered furniture at home.

Step 1: Dry Soil Removal

Before we ever turn on the steam, we start with a full vacuum of the chairs using a soft-brush upholstery tool. You’d be surprised how much dry dirt, crumbs, and hair can settle deep into the fabric. Removing dry debris helps prevent staining during the wet process and keeps grit from breaking down the fibers over time.

DIY tip: A handheld vacuum with a crevice tool works great for regular maintenance. Just be sure to go slowly and use short passes.

Step 2: Fabric-Safe Pre-Treatment

Next, we apply a fabric-safe pre-spray that targets grease, food residue, and general body oils. This step is important because most upholstery doesn’t respond well to scrubbing. You need a cleaner that can lift the soil out gently.

We applied the solution evenly, focusing on the headrest area and edges where hands often rest. This loosened up the grime without soaking the fabric or causing shrinkage.

DIY tip: Always spot test any upholstery cleaner on an out-of-sight area. Some fabrics can react poorly even to water-based solutions.

Step 3: Agitation with Upholstery Brush

Once the pre-spray has had a few minutes to work, we lightly agitate the surface with a soft-bristle brush. This helps work the solution deeper into the fabric and lifts up the grime so it can be rinsed out later. It also opens the fibers up to release embedded dirt.

We pay special attention to seams and tufted areas where debris often hides.

Step 4: Low-Moisture Steam Extraction

Now comes the deep clean. Using our upholstery-specific steam extraction tool, we rinse the fabric with hot water and immediately vacuum it back out. This removes the soil and cleaning solution in one pass and avoids over-wetting the fabric.

The key here is using just enough heat and pressure to clean without damaging the upholstery or leaving it soaked. Within minutes, we could see the chairs come back to life. Stains that had been there for years faded, and the fabric started to look brighter and more uniform.

Step 5: Drying and Final Grooming

After cleaning, we speed up the drying process with a small air mover. This helps prevent moisture from sitting too long in the padding underneath the fabric.

Once dry, we gently brush the fibers to lift the nap and even out the texture. It’s a subtle step, but it gives the piece that final finished look.

DIY tip: If you do spot clean at home, avoid over-wetting and always blot—never rub—so you don’t damage the fibers or push the stain in deeper.

The Result

The homeowner was amazed by the transformation. The chairs not only looked cleaner—they felt cleaner. The fabric had a soft texture again, and the old musty smell was gone. She told us it reminded her of when the set was brand new.

We left her with a few care tips and recommended light vacuuming every couple of weeks to keep dirt from building up. With a little maintenance, these chairs will look great for years to come.

Furniture Cleaning Services in Greensboro NC

If your upholstered furniture needs more than just a wipe-down, give J Rex Cleaning Solutions a call. We offer full-service upholstery steam cleaning in Greensboro for chairs, sofas, sectionals, headboards, and more.

Our process is safe, detailed, and proven to get results without the risks of over-wetting or damaging your fabric. Whether you need help with one chair or a full living room set, we’re here to help.

📲 Call or text today to get a fast quote or book a visit. We proudly serve Greensboro and the surrounding communities.